RetailTime Cash Drawer Setup

RetailTime Cash Drawer Setup

Overview

This article provides instructions of how to connect the RetailTime cash drawer to a printer and how to set it up in POS.


 

Requirements

  • If using BTP-R180II or Star Micronics TSP100/TSP143 LAN printer, it should be turned on and set up with RetailTime.
  • If using built-in Poynt printer, the Poynt power cord should be inputted to the right-most plug-in on the Poynt charging pad, the Poynt device should be placed on the charging pad, turned on, and then the built-in printer should be set up with RetailTime. 

 

Connecting RetailTime Cash Drawer to BTP-R180II or Star Micronics TSP100/TSP143 LAN Printer

1. Input the cash drawer's RJ12 connector to the back of the printer,  where it says "Cash Drawer." You should hear a click (if you do not, it is most likely connected a wrong way). 

2. The cash drawer is ready to setting up in POS. 

 

 

Connecting RetailTime Cash Drawer to Built-in Poynt Printer

Note: Your Poynt OS must be updated to the latest version.

1. Input an Ethernet cord into the left-most plug-in on the Poynt charging pad.

2. Connect the USB Cash Drawer Trigger into one of the center plug-ins on the Poynt device and to the back of the cash drawer. 

3. If the Poynt device is on the charging pad, a notification should appear saying that the cash drawer was connected successfully. 

4. Select Test Cash Drawer to test that the cash drawer is working.

5. Select Open Drawer.

6. If drawer opened successfully, tap Yes. If not, tap No.

 

Setting Up RetailTime Cash Drawer in POS

1. Log in to RetailTime POS

2. In the left navigation menu, tap on Settings--->Cash Drawer

3. Tap Search for cash drawer.

4. In the list that appears, select either the USB Trigger Cash Drawer (if using built-in Poynt printer) or the BTP-R180II printer.

5. Tap Test link to the right of the selected printer. If drawer opens, it is properly set up. 

6. Confirm cash drawer settings by tapping DONE.

7. Cash drawer is ready for usage in application.


    • Related Articles

    • APG Vasario Cash Drawer Setup

      Overview Before you can use the APG Vasario Cash Drawer, you will have to connect it to your printer and set it up on RetailTime. Requirements If using a Star printer, it should be turned on and set up with RetailTime. If using built-in Poynt ...
    • Cash Drawer Setup on Poynt

      Overview You can set up the cash drawer on your Poynt device by connecting the drawer to a BTP-R180II or Star TSP100 LAN printer.   Requirements 1. Must have selected Poynt from Payment Gateway drop-down menu in Store Settings of Back Office.  2. If ...
    • Cash Drawer Troubleshooting

      Overview If your cash drawer is not opening, follow the troubleshooting steps below (depending on if the drawer is connected to an Ethernet printer or Bluetooth printer).   Troubleshooting for Drawer Connected to Ethernet Printer Make sure your ...
    • RetailTime Cash Drawer Setup on Android

      Connect RetailTime Cash Drawer to Printer 1. Once your RetailTime BTP-R180II Printer is set up, input the cash drawer's RJ12 connector to the back of the printer, above where it says "Cash Drawer."  2. Cash drawer is ready to operate.    Set Up ...
    • Cash Drawer Setup on Poynt Smart Terminal

      Overview To set up a Cash Drawer on your Poynt device you can connect the drawer to an external receipt printer.   Requirements 1. Must have Credit/Debit POS Integration app installed in Back Office. To get the app please contact ...