RetailTime Cash Drawer Setup on All-in-One Device

RetailTime Cash Drawer Setup on All-in-One Device

Overview

Before you can use the RetailTime Cash Drawer on the All-in-One device, you will have to connect it to the device (or external printer) and set it up on RetailTime. 

 

Connecting RetailTime Cash Drawer 

1. Connect the cash drawer to the All-in-One device (or to Star or BTP printer if using one of those) via an RJ12 connector by inputting it into the cash drawer port on the back of the device. 

2. Turn on the device and the cash drawer should be ready to operate.

 

Setting Up RetailTime Cash Drawer on POS

1. Log in to RetailTime POS

2. In the left navigation menu, tap on Settings--->Cash Drawer

3. Tap Search for cash drawer.

4. In the list that appears, select the printer that the cash drawer is connected to.

5. Tap the Test link to the right of the selected printer. If the drawer opens, it is properly set up. 

6. Confirm cash drawer settings by tapping DONE.

7. The cash drawer will open upon each transaction in POS. 


    • Related Articles

    • RetailTime Cash Drawer Setup

      Overview This article provides instructions of how to connect the RetailTime cash drawer to a printer and how to set it up in POS. Requirements If using BTP-R180II or Star Micronics TSP100/TSP143 LAN printer, it should be turned on and set up with ...

    • Cash Drawer Setup on Poynt

      Overview You can set up the cash drawer on your Poynt device by connecting the drawer to a BTP-R180II or Star TSP100 LAN printer.   Requirements 1. Must have selected Poynt from Payment Gateway drop-down menu in Store Settings of Back Office.  2. If ...

    • APG Vasario Cash Drawer Setup

      Overview Before you can use the APG Vasario Cash Drawer, you will have to connect it to your printer and set it up on RetailTime. Requirements If using a Star printer, it should be turned on and set up with RetailTime. If using built-in Poynt ...

    • Cash Drawer Troubleshooting

      Overview If your cash drawer is not opening, follow the troubleshooting steps below (depending on if the drawer is connected to an Ethernet printer or Bluetooth printer).   Troubleshooting for Drawer Connected to Ethernet Printer Make sure your ...

    • Cash Drawer Setup on Poynt Smart Terminal

      Overview To set up a Cash Drawer on your Poynt device you can connect the drawer to an external receipt printer.   Requirements 1. Must have Credit/Debit POS Integration app installed in Back Office. To get the app please contact ...